| |
03/02/2012
|
 |
Side Guide Adjustment |
SGA™ ( Side Guide Adjustment™ ) is a mechanical/pneumatic system
that allows an automatic adjustment of the position of the product side
guides on the conveying line.
SGA™ system uses a standard pneumatic cylinder, with a maximum stroke
of 30mm, adjustable to 16 different positions in increments of 2mm.
All operating units work in sync placements by air pressure only.
Brochure download
Video download
|
12/10/2011
|
 |
Rexnord® Premium Service |
Rexnord Premium
Service provides our customers with the identification of all Rexnord products on
each conveyor, including the quantity and condition of each chain, belt, sprocket or
curve. The benefit of this service is to be able to do preventive maintenance, reduce
chain replacement cost and have the correct items and quantities in stock in case of
emergency break-downs.
Brochure download
|
26/08/2011
|
 |
Rexnord® 1000-series MatTop chains in 84 & 85mm |
Rexnord FlatTop continuously develops and introduces new products for conveyors. Our current
offering in the Rex®, MCC® and Marbett® product lines is frequently reviewed to ensure that our
products continue to give the best fit to the needs of our customers and to provide the best value.
As part of a product rationalization strategy, we have decided to upgrade the 1000-series MatTop
packaging to standard lengths of 3.048mtr (10ft). This packaging upgrade is only applicable to chains
in 84mm and 85mm executions.
Brochure download
|
25/08/2011
|
 |
Color change for blue food grade chains |
As a result of further optimization of our global production processes between our global
production locations all blue food grade belts in BHT, BLT and SMB material in near future will
be supplied in one uniform dark blue color.
Brochure download
|
24/08/2011
|
 |
Side Bracket S0692 |
Rexnord FlatTop continuously develops and introduces new products for conveyors. Our current offering in the Rex®, MCC® and Marbett® product lines is frequently reviewed to ensure that our products continue to give the best fit to the needs of our customers and to provide the best value.
As a part of this process we have decided to improve pin assembly by using eyebolt.
Brochure download
|
21/07/2011
|
 |
Hinges Part.S0337 |
Rexnord FlatTop continuously develops and introduces new products for conveyors. Our current offering in the Rex®, MCC® and Marbett® product lines is frequently reviewed to ensure that our products continue to give the best fit to the needs of our customers and to provide the best value.
As a part of this process we have decided to improve a design.
Material: hinge in reinforced polyamide PA FV ( black ). Pin in ferritic stainless steel.
Brochure download
|
19/07/2011
|
 |
Separation block Part.S0759-S0760 |
Rexnord FlatTop continuously develops and introduces new products for conveyors. Our current offering in the Rex®, MCC® and Marbett® product lines is frequently reviewed to ensure that our products continue to give the best fit to the needs of our customers and to provide the best value.
As a part of this process we have decided to improve a design.
Brochure download
|
01/07/2011
|
 |
Rexnord 1800-series Industrial MatTop Chain |
Rexnord is pleased to announce the introduction of a new 1-inch pitch MatTop chain series; the 1800-series Industrial MatTop chain. This chain was specifically developed to perform in an industrial environment handling industrial carriers, packages, corrugated, paper or other larger industrial product. The chain offers many advantages in performance and excels in easy maintenance. 1800 series is available in two executions: 1805 with a flat underside and 1825 with a scalloped underside, to fit any existing installation. 1800-series comes with a large range of molded square bored sprockets.
Brochure download
|
21/05/2011
|
 |
BALM New Generation MB |
BALM is the new generation of MB bearings that allows to standardize
one universal solution in place of both square and oval versions, and
moreover can simplify and reduce the cost of the conveyor structure in
the drive area.
Brochure download
Video download
|
09/05/2011
|
 |
1765 Zerogap |
Rexnord FlatTop continuously develops and introduces new products for conveyors. Our current
offering in the Rex®, MCC® and Marbett® product lines is frequently reviewed to ensure that our
products continue to give the best fit to the needs of our customers and to provide the best value.
As part of this process we have decided to equip 1765 Zerogap chain with the same pin used
in the Rexnord 1700 and 1720 Series TableTop®.
Brochure download
|
08/02/2011
|
 |
NSH 1005 Moulded Sprockets series |
Rexnord is pleased to introduce the NSH 1005 sprockets in moulded version. These sprockets feature a Single Keyway system and is assembled using two(M6) hexagonal bolts to make installation more easy. Furthermore the sprockets feature a hygienic design for easy cleaning. The sprockets are available in 13, 14, 15, 16, 18 and 21 teeth with a bore size of Ø40mm
Brochure download
|
|